An above-ground swimming pool offers your family and friends a simple and cheap way to relax during the hot days. However, if for any reason the ground under your facility is one-inch off-level, the water could pour out, and the pool’s wall might weaken – that could result in injuries and damages.
Thus, if you find your already up pool unleveled, you need to level it as soon as possible. That is why we have written this piece on how to level above ground pool already up.
Causes of Unleveled Pools
Table of Contents
- 1 Causes of Unleveled Pools
- 2 Steps to Leveling Your Above Ground Pool
- 3 Why Even Uneven Above Ground Pool?
- 4 How Level Should a Pool Be?
- 5 In Conclusion
There are a lot of things that can make your above ground pool to be uneven. We have discussed some of these issues below:
1. Pool Set on Uneven Ground
If you set your pool on an unleveled surface (about ¾” variation), there will be excessive pressure on the lower side. You can decide to leave the pool that way and hope for the best, but it might get worse in future.
Therefore, the best solution is to level the surface without taking the pool down.
2. Variation from Leg to Leg
If you don’t remedy this problem, there will be more pressure on one leg. However, you can easily rectify this issue without taking your above ground pool down.
Here, you can check the level of these legs using a bubble level when your pool is about 3” full. Then check it when it is filled with water.
3. Washout Under the Pool
That can easily happen if your backyard is sloped. Water can easily run under the pool and washout the soil.
If that happens, you would need to reset your pool by even out the ground using the method we look later.
4. Mice Under Pool
A mouse can burrow under your pool and then that area might begin to hollow out, leading to a surface that is sinking. That can also result in one area experiencing a lot of pressure.
NOTE: If you find yourself facing any of the above problems, you can easily resolve the issue by leveling the ground. The next section looks at the tools you would require when levelling it and the process you would follow.
Steps to Leveling Your Above Ground Pool
Here are the tools that you would require:
- Garden hose
NOTE: You should work gradually and persistently to ensure that you get an even surface. That will result in a more durable and stable ground that will give your above ground pool durability.
With that in mind, here are the steps that you should follow when leveling an already up pool.
1. Drain Some Water
The first step is to take your garden hose and use it to drain some water from the above ground pool. You can drain it halfway.
You should not try to level it when it is full since it can be harder. One thing you should ensure is that the water runs far away from your pool.
2. Wear the Gloves
Maybe this should be the first thing you do before you start working on your pool. You also need to wear other defensive cloth and apparatuses that you might have.
3. Remove the Leveling Blocks
Now you can remove these blocks from under the pool. You should evacuate the ones on the lower side of your above ground pool.
NOTE: You should not try to lower the higher part of the pool because it can be complicated. Also, it is better to avoid leveling the pool if it is completely off-level.
4. Pry the Wall Up
Use the shovel to prey the wall from every base connector. Continue until you get the ideal dimension.
5. Return the Blocks
Now you can return the blocks to their place. It might be hard, and that is why you should hammer them gently.
6. Repeat Steps 3 to 5
Now you can do the same for all the areas around your above ground swimming pool. You should only do that on the lower sides.
7. Pack Earth
Add and pack soul underneath your pool where you lifted the pool after you are done. Use your wheelbarrow to bring the soil.
8. Refill Your Pool
The last step is to refill your above ground pool and hope that you leveled the right way.
And those are the steps that you should follow when leveling your uneven swimming pool.
Why Even Uneven Above Ground Pool?
A pool that is resting on uneven surfaces can create a safety concern. It might have a deep and shallow end, which can be risky to kids.
The unleveled water can also cause problems to your skimmer as well as other cleaning apparatus if they get trapped in the shallow end.
Other problems include:
- Weak structure – Another issue of the uneven pool is the weak structure due to excessive pressure on one side. That can make the walls to collapse, break, or even twist, destroying the liner.
- Wrong appearance – You might also notice that your pool will look wrong if it is uneven. Other people can also notice that one side is higher than the other.
How Level Should a Pool Be?
A professional pool installer can tell you that they try to keep your facility as level as possible. And it is quite easy to achieve that when installing an above ground pool.
However, it can be a tall order trying to get it level, despite having all the tools and knowledge. A pool that is within 1/8” off-level is on the right track.
Such a pool can provide you with the service you deserve, be safe for use, and last for years. It is, therefore, important to ensure that your already up above ground pool is level.
It is important to note that it is the bottom track that should be level and not the surface inside your pool. Your pool can look great if you can get that track level and it will last for years.